The CSP-L is a seismic energy source for high resolution boomer sub-bottom profiling, primarily intended for use as part of the Inshore Boomer System.

Available as a 50 Joule or 100 Joule unit, the CSP-L uses minimal generator current, and is ideal for use on small vessels undertaking coastal survey work.

The CSP-D is a seismic energy source for boomer and sparker applications which has been developed from the proven CSP1500 and CSP2200 versions.Uprated to 2400 Joules and with a higher rated thyristor ‘switch’the CSP-D sets the new industry standard.

The unit, with the same chassis and 1500J/second HV engine, is available in three variants; the CSP-D700, CSP-D1200 and the CSP-D2400. Additional settings allow for longer boomer pulse widths with the potential of more boomer seabed penetration.

The two boomer plates, the AA201 and AA301, produce a sharp, repeatable “industry standard” single pulse. Both models are field proven and differ in detail specification.

The Model AA201 is the ‘small format’ transducer which can be towed on either the CAT100 or CAT200 surface tow vehicles. It is ideal for inshore surveys for high resolution sediment analysis with the CSP-L energy source or as a higher penetration device with the CSP-P and CSP-D models.

The 982 Smart Charger is used to re-charge all Applied Acoustics beacons fitted with re-chargeable batteries except the 300 Series Micro Beacons and all the 1000 Series Beacons.

The 982 is designed for operation in the dry environment of a vessel’s Operations Room.

Easy to operate with a large back-lit display and 4-key menu.

The 500 Series release beacon provides the means by which scientific, survey or operational equipment can be deployed or reliably retrieved from its anchored seabed mooring.

Its positive drive-off mechanism ensures a reliable mechanical release in high bio-fouling environments.

The 1300A Series Micro Beacon is an evolution of the popular 300 Series that has been designed to add extra versatility to the Micro Beacon range.

Ideal for use in shallow water environments, and operation in confined space.

As with its predecessor, the 1300A Series Micro Beacon has an external connector that allows it to operate from a ROV 24V power supply and for channel selection via a USB adaptor cable.

The 1200A Series Micro Beacon is ideal for use in shallow water environments, operation in a confined space or for applications not requiring a high level of power output.

The beacon has a Micro USB interface protected by a rugged waterproof cap that allows channel selection and battery recharging without opening the housing.