Inertial Labs has developed Motion Reference Units (MRU) to meet requirements from marine and hydrographic applications. MRU is enhanced, high-performance strapdown Motion Sensor, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it is mounted.
The Inertial Labs Motion Reference Units utilizes solid state 3-axes each of precision accelerometers, magnetometers, gyroscopes and barometric sensors to provide accurate Heave, Sway, Surge, Pitch and Roll of the device under measure.
Integration of very low noise gyroscopes output provides high frequency, real-time measurement of the Vessel, Ships, Helidecs, ROV, Marine antennas, Cranes rotation about all three rotational axes.
Using Ethernet communications, this all-in-one, high performance digital imaging sonar can exceed 100 shots per second on the 1 m range at a 2 mm range resolution, producing near-photographic image quality.
The 881L is a multi-frequency system that can operate with customized configurations or revert to default settings to match appropriate operating range scales.
In addition to the benefits of low power, a simple set-up and installation procedure make this powerful sonar an ideal tool for remotely operated platforms ranging from large work ROV’s to small inspection vehicles, as well as AUV and UUV applications.
Sometimes controlled high torque is required and this is the tool for such operations.
12 000 Nm makes a difference.
Suitable for most 1-1/2” square power sockets in the marked.
IKM Technology Suction Hose Connection system.
If used under pressure, max pressure equal 8 bar.
IKM Technology subsea soft rope cutter with fishtale handle. Can be used with different kind of blades.
Can be delivered with a small vertical blade attached to the two bolts in the front of the saw. Manually operated by ROV manipulator.
IKM Technology Subsea Saw with a range up to 200mm. Within capacity for most Work Class ROV’s. Track record after years of use in the North Sea.
The saw is designed to cut steel pipes, steel profiles and wires.
Standard blades to be supplied with saw are carbide and diamond types. Claws can be replaced if specific interface is required.
