GeoSwath Plus offers very efficient simultaneous swath bathymetry and side scan seabed mapping with accuracies that have been shown to exceed the IHO Standards for Hydrographic Surveys.

The applied phase measuring bathymetric sonar technology provides data coverage of up to 12 times the water depth, giving unsurpassed survey efficiency in shallow water environments.

The EM 710-MK2 multibeam echo sounder is a high to very high resolution seabed mapping system capable of meeting all relevant survey standards.

The coverage for EM 710-MK2 is increased by replacing the receiver interface boards with new boards and new transceiver SW. The transducer arrays are the same.

The system configuration can be tailored to the user requirements, allowing for choice of beam widths as well as transmission modes.

cNODE MiniS 34-180, cNODE MiniS 34-40V and cNODE MiniS 37-40V

Kongsberg Maritime’s cNODE® MiniS Transponder has an impressive range of
features, including 560+ Cymbal digital acoustic channels and FSK B channels.
The transponder is available with pressure rated housings of 4000 m and
7000 m and different transducer options.

The cNODE MiniS Transponders are ideal for positioning a WROV or Towfish
in SSBL mode. For noisy vehicles or for faster position update rates responder
mode is available. The internal tilt sensor data can be transmitted on the
back of the navigation reply without need for additional telemetry to provide
both position and attitude of tracked targets simultaneously.

MINI – MEDIUM FREQUENCY, 4000 M

cNODE® is a family of transponders for underwater acoustic positioning and data link and operates with both HiPAP®, HPR and cPAP® transceivers.

cNODE® operates with either the HiPAP/HPR 400 channels and telemetry or with the new Cymbal acoustic protocol.

MAXI AND MIDI – MEDIUM FREQUENCY, 4000 M

cNODE is a family of transponders for underwater acoustic positioning and data link and operates with both HiPAP®, HPR and cPAP® transceivers.

P/N 974-70130000

The 1007 digital altimeters are small, light weight and designed for deep ocean applications, where dimensions and weight are key equipment selection factors.

The 1007 altimeter is ideally suited to applications such as: positioning, berthing, height above seabed, and below surface monitoring.

Compact and cost effective inertial navigation system for ROV navigation

Rovins Nano merges the established high-grade exail inertial navigation system with our competitive IMU. lt is built on exail’s renowned FOG truly solid state technology and offshore instrumentation expertise.

Rovins Nano offers the unbeatable stability and accuracy of the inertial position while simplifying the operation with its automatic and autonomous external sensor management.

Rovins Nano is the ROV navigation solution you can rely on, bringing an additional level of safety in case of deficient aiding sensors.