The SeaHub interfaces are software configurable to drive long lines with ARCNET or RS485 as required by the individual sensors and RS232, RS422 or TTL via multiplexer channels.
The unit may be mains or DC powered; if mains powered then a DC output is available to power connected equipment. If DC powered the output DC is a fused extension of the input supply.
Front panel diagnostic LEDs show interface ports in use and their status. The SeaHub is fully compatible with Tritech Seanet Pro software suite and is automatically recognised in Windows if Seanet Pro is installed.
Tritech’s digital precision altimeters offer configurable design with a wide range of options available.
OEM configurations include, for example, low magnetic signature rigid Delrin™ (Plastic) housings or supplied with a right-angled transducer.
Output for the PA200 or PA500 can either be simultaneous analogue and digital outputs, allowing them to be interfaced to a wide range of PC devices, (including operated through Tritech’s data acquisition and logging software, Seanet Pro), data loggers, ROV telemetry systems and multiplexers.
Tritech’s digital precision altimeters offer configurable design with a wide range of options available.
OEM configurations include, for example, low magnetic signature rigid Delrin™ (Plastic) housings or supplied with a right-angled transducer.
Output for the PA200 or PA500 can either be simultaneous analogue and digital outputs, allowing them to be interfaced to a wide range of PC devices, (including operated through Tritech’s data acquisition and logging software, Seanet Pro), data loggers, ROV telemetry systems and multiplexers.
The Multicomm can be linked to a number of SeaKing sensors and communication can then be made to the Surface Control Unit (SCU) using the RS232 protocol.
As well as providing RS232 output the Multicomm can act as a transparent interface allowing communication using Tritech’s ARCNET protocol.
The Multicomm can also accept inputs from third party sensors, such as a gyro, which would be connected to the Multicomm AUX port.
The Gemini NBI offers a narrow vertical beam and 130° swath
The Gemini NBI produces an acoustic image, cutting through the water with a narrow acoustic beam and at the high refresh rate offered from the Gemini range of multibeam sonars. Based on the proven design of the Gemini 720i, the Gemini NBI uses a 1° vertical beam instead of the 20°vertical beam found on the 720i.
This reduced beam width allows the user to more precisely identify the position of the acoustic targets than is possible with a wide beam imaging sonar which is commonly used for obstacle avoidance operations.
Low power underwater visualisation
The 720is is the latest generation from Tritech’s renowned multibeam sonar range and offers a real-time, high frequency imaging solution.
The Gemini 720is operates at 720kHz and this combined with Tritech’s state-of-the-art processing electronics, produces images of superb clarity.
High resolution echo sounder from the Gemini range of multibeams
The Gemini 620pd benefits from the latest technological advances in signal processing.
These advances allow the 620pd to produce high performance bathymetry data that is compatible with industry standard survey packages for processing.
