The STR SeaCount is our latest generation of cable measurement system, replacing the previous T-Count product line, offering improved performance, accuracy and reliability.

The paid-out cable length is shown on an LCD display, on a PC’s screen, and can be forwarded as RS232 serial data for use with a wide variety of data logging systems.

Typical applications include SideScan Sonar towfish, Sub Bottom Profilers, Remotely Operated Vehicles, CTD systems and Magnetometer arrays

The STR Pipe Tracker ROV Deployment Frame is a hydraulically controlled retractable frame assembly designed for the mounting of the coil arrays to the front of an ROV.

Depth rated to 3000m
Robust and lightweight design
Fully adjustable to suit different ROV sizes

The STR range of subsea laser pointers and line generators are designed to meet all underwater measurement and identification tasks.

Models are either fitted with category II low power laser modules for safety or high intensity laser modules for greater transmission. All models can be supplied with a 3000m or 6000m depth rating and operate on an 8-30V DC Input with over voltage and reverse polarity protection.

STR SeaCross Green Laser Cross Generator
STR SeaLine Green Laser Line Generator
STR SeaDot Green Laser Pointer
STR SeaDot Red Laser Pointer

Key Features

  • 3000m or 6000m Depth Rating
  • 8-30V DC Input
  • Internal Thermal Protection
  • Long Lifespan

The laser module is a category II low power red laser. The laser can be powered from an 8-30VDC supply and is equipped with over voltage and reverse polarity protection.

Standard units are supplied in a durable hard anodised aluminium housing and are depth-rated to 3000m. When used in pairs, imagery scaling is possible by mounting the lasers a set distance apart to identify targets at an equivalent spacing.

Key Features

  • Low cost
  • Low power design with class II laser output
  • Accurate photographic scale measurements
  • 3000m depth rating

The STR Gyro Frame can be configured to client requirements using either an aluminium or stainless steel frame. All frames are supplied fully certified and come complete with ROV lifting handle, two leg lifting strop and a sacraficial base plate.

Due to the unique twin “V” Plate locking design, high repeatable alignment accuracy is maintained allowing the cage to be removed from a structure and reinstalled with confidence.

key Features

  • Highly repeatable locking mechanism
  • On/Off switch for battery conservation
  • ROV friendly switch and locking mechanism
  • High capacity battery with built in intelligence

The SeaUPS is a subsea Uninterruptible Power Supply designed to keep inertial navigation systems on ROVs initialised, with up to 30 minutes output hold up time possible in the event of temporary electrical power outages.

The SeaUPS offers flexibility in input supply, working with both AC and DC inputs which are fully isolated from the UPS DC output.

The UPS is fitted with an internal NiMH battery. Charge management is automatic and the 3000m rated subsea housing is fitted with an automatic pressure vent for safety.

Key Features

  • AC or DC power input
  • 24VDC regulated output
  • Up to 30 minutes hold-up time. Repeatable up to 5 times on fully charged batteries and 1 AMP load before requiring a recharge
  • Load start up mode for high surge current loads
  • 3000m depth rated
  • Intelligent battery management